Up to 25% additional performance
More usable power and torque for cultivation, transport, PTO work and heavy field operations.
STEINBAUER performance modules for agriculture
Performance modules for tractors and agricultural machinery.
Improve pulling performance, PTO output and torque under load with an application-specific STEINBAUER module. Up to 25% additional power and torque, with professional UK installation, PTO dyno testing and technical support.
Why choose STEINBAUER?
Performance developed for demanding field work.
STEINBAUER works alongside the factory ECU to deliver stronger usable output without permanently rewriting the machine software.
Improved PTO performance
Stronger output for PTO-driven implements and demanding agricultural applications.
Stronger torque under load
Improved pulling performance when working in the field, on gradients or during transport.
UK installation and dyno testing
Professional fitting with optional PTO dynamometer testing and documented results.
Intelligent engine technology
Performance added without rewriting the machine ECU.
STEINBAUER optimises injection duration while leaving injection timing and common-rail pressure unchanged. The original ECU continues to manage engine protection, safety strategies and operating limits.
- No permanent ECU remap
- No change to injection timing
- No common-rail pressure increase
- Original ECU safety strategies remain active
- Application-specific agricultural development
- Removable hardware solution
Performance under load
See the difference in demanding field work.
Same tractor. Same implement. Same conditions. As working load increases, STEINBAUER helps the machine maintain working speed with more usable torque and less downshifting.
STANDARD
STEINBAUER
WORKING LOAD 35%
WORKING SPEED — STANDARD
8.5km/h
RPM falls under load
Rises on each downshift
Rises on each downshift
WORKING SPEED — STEINBAUER
8.5km/h
Lower working RPM
~1,650–1,700 rpm
~1,650–1,700 rpm
Maintaining working speed can help cover more ground during the same operating period.
Higher productivity can reduce the total machine hours needed to complete the same job.
Fewer operating hours can mean less total fuel used to complete the work.
Maintains speedHelps hold momentum when field load increases.
Less downshiftingMore usable torque can reduce the need to change down as often.
More usable torqueStronger pull through the normal working RPM range.
More work doneBetter field progress when the machine is operating under sustained load.
STEINBAUER extends injection duration – up to 25% more power and torque (where applicable).
This comparison is illustrative and is intended to explain the benefit of additional usable power and torque under load. Actual speed, engine RPM, gear selection, productivity and fuel use depend on the tractor, implement, soil conditions, transmission, load and application.
How the system works
More output across the machine's working range.
The module works alongside the original engine management system rather than replacing or rewriting it.
PTO dynamometer testing
Measure the result at the tractor PTO.
STEINBAUER UK offers professional tractor installation with Prüfstand PTO dynamometer testing from £300, subject to vehicle, machine and location.
- Standard PTO power measurement
- STEINBAUER PTO power measurement
- Standard and STEINBAUER torque curves
- Before-and-after comparison
- Documented test results where available
Popular manufacturers
Browse compatible agricultural applications.
Select a manufacturer to view available STEINBAUER applications. Compatibility depends on engine, injection system and machine specification.
John Deere
View applications →
New Holland
View applications →
Case IH
View applications →
Fendt
View applications →
Massey Ferguson
View applications →
Claas
View applications →
JCB
View applications →
Deutz-Fahr
View applications →
Valtra
View applications →
McCormick
View applications →
Krone
View applications →
Bateman
View applications →
Professional installation
Installed and supported for working machinery.
STEINBAUER UK provides application confirmation, professional installation and technical support for tractors, combines and self-propelled machinery.
- Application confirmation before supply
- Professional installation
- Plug-and-play and selected wire-in systems
- Functional checks after installation
- PTO dyno testing available
- UK technical support and aftercare
Frequently asked questions
Common questions about STEINBAUER for agriculture.
Does STEINBAUER remap the machine ECU?
No. The module works alongside the factory ECU and does not permanently rewrite the original software.
Does it increase common-rail pressure?
No. STEINBAUER does not increase common-rail pressure. Performance is achieved through injection-duration optimisation.
Can you measure the performance increase?
Yes. For suitable tractors, STEINBAUER UK can carry out PTO dynamometer testing to compare standard and STEINBAUER power and torque.
Is the module removable?
Yes. The hardware can be removed and the machine returned to standard without restoring an ECU remap.
Is installation available on farm?
Installation may be available depending on the machine, location and application. Contact STEINBAUER UK for a quotation.
Find your machine
Browse agricultural applications
Search compatible STEINBAUER agricultural applications.
Search by manufacturer, model, engine, original power output or STEINBAUER part number.