STEINBAUER application

Claas Arion 620

6.8L DPS 6068 Tier 3B (CR)

STEINBAUER performance module for the Claas Arion 620 6.8L DPS 6068 Tier 3B (CR), designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.

Key benefits

  • Up to +25% power and torque increase, depending on application.
  • No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
  • Injection duration module developed to add performance without generic one-size-fits-all mapping.
  • Removable solution that can be removed if required.
  • Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER Performance comparison
Power (BHP)
600 1,000 1,400 1,800 2,200 BHP Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 156 BHP
STEINBAUER 194 BHP
+38 BHP
Torque (Nm)
600 1,000 1,400 1,800 2,200 Nm Engine speed (RPM)
Illustrative agricultural engine-speed curve
Standard 659 Nm
STEINBAUER 824 Nm
+165 Nm

STEINBAUER Technology

  • External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
  • Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
  • Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.

Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.

Vehicle specification

Vehicle details

Manufacturer
Claas
Model
Arion 620
Engine
6.8L DPS 6068 Tier 3B (CR)
Displacement
6,788 cc
Steinbauer specification

STEINBAUER Module details

Part number
220632
Installation
Plug-in
Availability
Available
Engine management
Factory ECU retained
Module Warranty (3 years upon registration)
1 year

Installation guides

Installation instructions for STEINBAUER part number 220632 .

Login required. Installation guides are available to registered STEINBAUER customers, dealers and administrators.
220632 PDF installation guide · EN Login to download
Power and torque upgrade

Claas Arion 620 tuning and power increase

The STEINBAUER Power Module is designed for drivers and operators looking for a Claas Arion 620 power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.

For this application, published performance data shows power increasing from 156 BHP to 194 BHP, with torque increasing from 659 Nm to 824 Nm.

If you are searching for a Claas Arion 620 tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.

Explore more

Related Claas applications

View all Arion 620 applications →
Part 220024 Claas Arion 620 6.8L DPS 6068 Tier 3 (CR) 138 → 173 BHP View application → Part 230213 Claas 220 Atos 2.9L 75 → 94 BHP View application → Part 230213 Claas 230 Atos 2.9L 83 → 105 BHP View application → Part 230123 Claas 240 Atos 2.9L 90 → 113 BHP View application → Part 230081 Claas 330 Atos 3.8L FARMotion Tier 4i 87 → 105 BHP View application → Part 230081 Claas 340 Atos 3.8L FARMotion Tier 4i 101 → 121 BHP View application →
Why choose STEINBAUER?

Intelligent performance technology

More power

Increased performance where applicable for stronger acceleration and improved working capability.

More torque

Improved pulling power throughout the usable engine speed range.

Safe and reliable

Original ECU programming and factory engine safety parameters remain active.

Removable installation

The vehicle or machine can be returned to its original factory configuration.