Vehicle details
- Manufacturer
- Deutz-Fahr
- Model
- 6190 TTV
- Engine
- 6.1L TCD Tier 4i
- Displacement
- 6,057 cc
STEINBAUER application
Deutz-Fahr 6190 TTV Power Module
6.1L TCD Tier 4i
STEINBAUER performance module for the Deutz-Fahr 6190 TTV 6.1L TCD Tier 4i, designed to provide increased power and torque while retaining the original ECU programming and factory engine safeguards.
Key benefits
- Up to +25% power and torque increase, depending on application.
- No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
- Injection duration module developed to add performance without generic one-size-fits-all mapping.
- Removable solution that can be removed if required.
- Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER
Performance comparison
Power (BHP)
Illustrative agricultural engine-speed curve
Standard
181 BHP
STEINBAUER
227 BHP
+46 BHP
Torque (Nm)
Illustrative agricultural engine-speed curve
Standard
820 Nm
STEINBAUER
1,025 Nm
+205 Nm
STEINBAUER Technology
- External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
- Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
- Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.
Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.
STEINBAUER Module details
- Part number
- 220866
- Installation
- Plug-in
- Availability
- Available
- Engine management
- Factory ECU retained
- Module Warranty (3 years upon registration)
- 1 year
Deutz-Fahr 6190 TTV tuning and power increase
The STEINBAUER Power Module is designed for drivers and operators looking for a Deutz-Fahr 6190 TTV power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.
For this application, published performance data shows power increasing from 181 BHP to 227 BHP, with torque increasing from 820 Nm to 1,025 Nm.
If you are searching for a Deutz-Fahr 6190 TTV tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.
Why choose STEINBAUER?
Intelligent performance technology
Increased performance where applicable for stronger acceleration and improved working capability.
Improved pulling power throughout the usable engine speed range.
Original ECU programming and factory engine safety parameters remain active.
The vehicle or machine can be returned to its original factory configuration.