STEINBAUER application Application in development

Land Rover Range Rover Evoque

2.0L SI4 EUR6

A STEINBAUER application is currently in development for the Land Rover Range Rover Evoque 2.0L SI4 EUR6. Register your interest and STEINBAUER UK can contact you when development and final validation are complete.

Key benefits

  • Up to +25% power and torque increase, depending on application.
  • No ECU software overwrite — the STEINBAUER system works alongside the original engine management.
  • Injection duration module developed to add performance without generic one-size-fits-all mapping.
  • Removable solution that can be removed if required.
  • Application-specific development for the individual engine and vehicle or machine application.
STEINBAUER Performance comparison
Power (BHP)
1,000 2,000 3,000 4,000 5,000 BHP Engine speed (RPM)
Illustrative car engine-speed curve
Standard 237 BHP
STEINBAUER 284 BHP
+47 BHP
Torque (Nm)
1,000 2,000 3,000 4,000 5,000 Nm Engine speed (RPM)
Illustrative car engine-speed curve
Standard 340 Nm
STEINBAUER 408 Nm
+68 Nm

STEINBAUER Technology

  • External ECU technology — Works alongside the original engine management system without permanently rewriting the factory ECU software.
  • Load-dependent performance — Additional power and torque are delivered progressively as engine demand increases.
  • Application-specific calibration — Developed specifically for the individual engine and application rather than using a generic universal setting.

Illustrative simulated performance graphic based on published application data. Curves are illustrative and are not measured dyno traces.

Vehicle specification

Vehicle details

Manufacturer
Land Rover
Model
Range Rover Evoque
Engine
2.0L SI4 EUR6
Displacement
1,999 cc
Steinbauer specification

STEINBAUER Module details

Part number
in prep.
Installation
To confirm
Availability
In development
Engine management
Factory ECU retained
Module Warranty (3 years upon registration)
1 year
Power and torque upgrade

Land Rover Range Rover Evoque tuning and power increase

The STEINBAUER Power Module is designed for drivers and operators looking for a Land Rover Range Rover Evoque power increase without replacing the factory ECU software. The module works alongside the original engine management system and can be removed to return the vehicle or machine to its standard configuration.

For this application, published performance data shows power increasing from 237 BHP to 284 BHP, with torque increasing from 340 Nm to 408 Nm.

If you are searching for a Land Rover Range Rover Evoque tuning module, this page contains the compatible STEINBAUER part number, installation information, performance figures and available accessories for this exact application.

Explore more

Related Land Rover applications

View all Range Rover Evoque applications →
Part 230152 Land Rover Range Rover Evoque 2.0L TD4 EUR6 148 → 177 BHP View application → Part in prep. Land Rover Range Rover Evoque 2.0L TD4 EUR6 177 → 212 BHP View application → Part 220500 Land Rover Range Rover Evoque 2.2 eD4 148 → 178 BHP View application → Part 220500 Land Rover Range Rover Evoque 2.2 SD4 188 → 225 BHP View application → Part 220500 Land Rover Range Rover Evoque 2.2 TD4 148 → 177 BHP View application → Part 220559 Land Rover Defender 2.2 D 121 → 145 BHP View application →
Why choose STEINBAUER?

Intelligent performance technology

More power

Increased performance where applicable for stronger acceleration and improved working capability.

More torque

Improved pulling power throughout the usable engine speed range.

Safe and reliable

Original ECU programming and factory engine safety parameters remain active.

Removable installation

The vehicle or machine can be returned to its original factory configuration.