Deutz engine tuning

Deutz TCD 7.8 tuning & performance modules.

Browse STEINBAUER applications for Deutz TCD 7.8 engines. Find the correct application by machine or vehicle, engine specification, factory power output and STEINBAUER part number.

View compatible applications Open the full finder
Engine family

One engine family. Many different applications.

Deutz TCD 7.8 engines are used in higher-output agricultural and industrial machinery. STEINBAUER therefore matches the module to the exact machine or vehicle and engine application rather than treating every engine in the family as identical.

3 matching published applications
1 STEINBAUER part numbers represented
Up to 25% additional performance where applicable
Compatible applications

Find your Deutz TCD 7.8 application.

Select the exact model and engine specification below. Each result links to its dedicated STEINBAUER application page with power, torque, part number and ordering details.

Deutz-Fahr 9290 TTV 7.8L TTCD L06 Tier 4F
Power 274 → 342 BHP
Torque 1,205 → 1,506 Nm
Part number 240111
→
Deutz-Fahr 9310 TTV 7.8L TTCD L06 Tier 4F
Power 292 → 365 BHP
Torque 1,290 → 1,612 Nm
Part number 240111
→
Deutz-Fahr 9340 TTV 7.8L TTCD L06 Tier 4F
Power 311 → 389 BHP
Torque 1,372 → 1,715 Nm
Part number 240111
→
STEINBAUER technology

Additional usable power without permanently rewriting the ECU.

STEINBAUER works alongside the original engine management system. The module uses application-specific injection-duration optimisation while leaving the original ECU software in place.

  • No permanent ECU remap
  • No common-rail pressure increase
  • No change to injection timing
  • Factory ECU safety strategies remain active
  • Removable hardware solution
  • UK installation and technical support
How STEINBAUER works
Questions about Deutz TCD 7.8 tuning

Frequently asked questions.

Can a Deutz TCD 7.8 engine be tuned with STEINBAUER?

Yes, where a matching STEINBAUER application has been developed for the exact machine, engine management system and factory power level. Use the application list on this page to identify a compatible application.

Is every Deutz TCD 7.8 engine the same?

No. Engines within the same family can exist in different generations, emissions stages, injection systems and factory power ratings. The correct STEINBAUER part number depends on the exact application.

How much extra power is available on a Deutz TCD 7.8?

The increase depends on the exact application. STEINBAUER calibrations are developed for the individual engine, vehicle or machine and published performance data should always be checked on the exact application page.

Does STEINBAUER remap the original ECU?

No. The STEINBAUER module works alongside the factory engine management system without permanently rewriting the original ECU software.

Does STEINBAUER increase common-rail pressure?

No. STEINBAUER performance is achieved through application-specific injection-duration optimisation rather than increasing common-rail pressure.

Can the STEINBAUER module be removed?

Yes. The module is a removable hardware solution. Installation method varies by application, and registered customers and dealers can access available installation guides and videos.