FPT engine tuning

FPT Cursor 13 tuning & performance modules.

Browse STEINBAUER applications for FPT Cursor 13 engines. Find the correct application by machine or vehicle, engine specification, factory power output and STEINBAUER part number.

View compatible applications Open the full finder
Engine family

One engine family. Many different applications.

FPT Cursor 13 engines power high-output tractors, combines, forage harvesters, trucks and specialist machinery. STEINBAUER therefore matches the module to the exact machine or vehicle and engine application rather than treating every engine in the family as identical.

105 matching published applications
11 STEINBAUER part numbers represented
Up to 25% additional performance where applicable
Compatible applications

Find your FPT Cursor 13 application.

Select the exact model and engine specification below. Each result links to its dedicated STEINBAUER application page with power, torque, part number and ordering details.

Case IH Axial-Flow 8230 12.9L FPT Cursor 13 Tier 4A
Power 451 → 563 BHP
Torque — → — Nm
Part number 220421
→
Case IH Axial-Flow 8230 12.9L FPT Cursor 13 Tier 4A
Power 451 → 563 BHP
Torque — → — Nm
Part number 230129
→
Case IH Axial-Flow 9010 12.9L FPT Cursor 13 Tier 3
Power 625 → 750 BHP
Torque — → — Nm
Part number 220421
→
Case IH Axial-Flow 9010 12.9L FPT Cursor 13 Tier 3
Power 625 → 750 BHP
Torque — → — Nm
Part number 230129
→
Case IH Axial-Flow 9230 12.9L FPT Cursor 13 Tier 4A
Power 500 → 626 BHP
Torque — → — Nm
Part number 220421
→
Case IH Axial-Flow 9230 12.9L FPT Cursor 13 Tier 4A
Power 500 → 626 BHP
Torque — → — Nm
Part number 230129
→
Case IH Steiger 425 12.9L FPT Cursor 13 Stage V
Power 425 → 510 BHP
Torque — → — Nm
Part number 240158
→
Case IH Steiger 425 Rowtrac 12.9L FPT Cursor 13 Stage V
Power 425 → 510 BHP
Torque — → — Nm
Part number 240158
→
Case IH Steiger 475 12.9L FPT Cursor 13 Stage V
Power 475 → 570 BHP
Torque — → — Nm
Part number 240158
→
Case IH Steiger 475 Quadtrac 12.9L FPT Cursor 13 Stage V
Power 475 → 570 BHP
Torque — → — Nm
Part number 240158
→
Case IH Steiger 475 Rowtrac 12.9L FPT Cursor 13 Stage V
Power 475 → 570 BHP
Torque — → — Nm
Part number 240158
→
Case IH Steiger 500 (2014-2015) 12.9L FPT Cursor 13 Tier 4B / Tier 4F
Power 500 → 625 BHP
Torque 2,374 → — Nm
Part number 220553
→
Case IH Steiger 500 (Model Year: 2016-2025) 12.9L FPT Cursor 13 Tier 4B / Tier 4F
Power 500 → 625 BHP
Torque 2,374 → — Nm
Part number 240076
→
Case IH Steiger 500 Quadtrac (2014-2015) 12.9L FPT Cursor 13 Tier 4B / Tier 4F
Power 500 → 625 BHP
Torque 2,374 → — Nm
Part number 220553
→
Case IH Steiger 500 Quadtrac (Model Year: 2016-2025) 12.9L FPT Cursor 13 Tier 4B / Tier 4F
Power 500 → 625 BHP
Torque 2,374 → — Nm
Part number 240076
→
Case IH Steiger 525 12.9L FPT Cursor 13 Stage V
Power 526 → 630 BHP
Torque — → — Nm
Part number 240158
→
View all FPT Cursor 13 applications
STEINBAUER technology

Additional usable power without permanently rewriting the ECU.

STEINBAUER works alongside the original engine management system. The module uses application-specific injection-duration optimisation while leaving the original ECU software in place.

  • No permanent ECU remap
  • No common-rail pressure increase
  • No change to injection timing
  • Factory ECU safety strategies remain active
  • Removable hardware solution
  • UK installation and technical support
How STEINBAUER works
Questions about FPT Cursor 13 tuning

Frequently asked questions.

Can a FPT Cursor 13 engine be tuned with STEINBAUER?

Yes, where a matching STEINBAUER application has been developed for the exact machine, engine management system and factory power level. Use the application list on this page to identify a compatible application.

Is every FPT Cursor 13 engine the same?

No. Engines within the same family can exist in different generations, emissions stages, injection systems and factory power ratings. The correct STEINBAUER part number depends on the exact application.

How much extra power is available on a FPT Cursor 13?

The increase depends on the exact application. STEINBAUER calibrations are developed for the individual engine, vehicle or machine and published performance data should always be checked on the exact application page.

Does STEINBAUER remap the original ECU?

No. The STEINBAUER module works alongside the factory engine management system without permanently rewriting the original ECU software.

Does STEINBAUER increase common-rail pressure?

No. STEINBAUER performance is achieved through application-specific injection-duration optimisation rather than increasing common-rail pressure.

Can the STEINBAUER module be removed?

Yes. The module is a removable hardware solution. Installation method varies by application, and registered customers and dealers can access available installation guides and videos.