Perkins engine tuning

Perkins 1104D-44T tuning & performance modules.

Browse STEINBAUER applications for Perkins 1104D-44T engines. Find the correct application by machine or vehicle, engine specification, factory power output and STEINBAUER part number.

View compatible applications Open the full finder
Engine family

One engine family. Many different applications.

Perkins 1104D-44T 4.4-litre diesel engines are used across tractors and agricultural machinery in several Tier 3-era applications. STEINBAUER therefore matches the module to the exact machine or vehicle and engine application rather than treating every engine in the family as identical.

5 matching published applications
1 STEINBAUER part numbers represented
Up to 25% additional performance where applicable
Compatible applications

Find your Perkins 1104D-44T application.

Select the exact model and engine specification below. Each result links to its dedicated STEINBAUER application page with power, torque, part number and ordering details.

Arma Trac 1004 Lux 4.4L Perkins 1104D-44T Tier 3 / Tier 3A
Power 101 → 126 BHP
Torque 412 → 515 Nm
Part number 240159
→
Arma Trac 1054 E 4.4L Perkins 1104D-44T Tier 3 / Tier 3A
Power 101 → 125 BHP
Torque 412 → 515 Nm
Part number 240159
→
Arma Trac 1104 Lux 4.4L Perkins 1104D-44T Tier 3 / Tier 3A
Power 109 → 135 BHP
Torque 420 → 525 Nm
Part number 240159
→
Arma Trac 804.4e 4.4L Perkins 1104D-44T Tier 3 / Tier 3A
Power 74 → 91 BHP
Torque 307 → 383 Nm
Part number 240159
→
Arma Trac 904 Lux 4.4L Perkins 1104D-44T Tier 3 / Tier 3A
Power 91 → 114 BHP
Torque 393 → 491 Nm
Part number 240159
→
STEINBAUER technology

Additional usable power without permanently rewriting the ECU.

STEINBAUER works alongside the original engine management system. The module uses application-specific injection-duration optimisation while leaving the original ECU software in place.

  • No permanent ECU remap
  • No common-rail pressure increase
  • No change to injection timing
  • Factory ECU safety strategies remain active
  • Removable hardware solution
  • UK installation and technical support
How STEINBAUER works
Questions about Perkins 1104D-44T tuning

Frequently asked questions.

Can a Perkins 1104D-44T engine be tuned with STEINBAUER?

Yes, where a matching STEINBAUER application has been developed for the exact machine, engine management system and factory power level. Use the application list on this page to identify a compatible application.

Is every Perkins 1104D-44T engine the same?

No. Engines within the same family can exist in different generations, emissions stages, injection systems and factory power ratings. The correct STEINBAUER part number depends on the exact application.

How much extra power is available on a Perkins 1104D-44T?

The increase depends on the exact application. STEINBAUER calibrations are developed for the individual engine, vehicle or machine and published performance data should always be checked on the exact application page.

Does STEINBAUER remap the original ECU?

No. The STEINBAUER module works alongside the factory engine management system without permanently rewriting the original ECU software.

Does STEINBAUER increase common-rail pressure?

No. STEINBAUER performance is achieved through application-specific injection-duration optimisation rather than increasing common-rail pressure.

Can the STEINBAUER module be removed?

Yes. The module is a removable hardware solution. Installation method varies by application, and registered customers and dealers can access available installation guides and videos.